DNS is an acronym used for ‘Domain Name Systems’. DNS work along with IP addresses to ensure greater security. Therefore, if the user is been typing a web address in that of the web browser, DNS would resolve a name to a number because the only element PC knows is the numbers. A router when gets associated or connected with that of the internet and enquire for ISP, so as to know the IP address, it caters address of more than one DNS servers.
Now when you start your PC and enquire the router for IP address, the router responds by the passing on the DNS information that was provided by the ISP. It also returns the IP address that means, the router acts as a DNS server. Thus, let’s check out the ways by which one can check for the network traffic if it is employing effectively the DNS resolver that the user has set.
How One Can Test DNS Settings With The Use of DNSleaktest.com
To get to know if the network traffic is been routed from the DNS servers that the user has configured, the best way is to use the ‘DNS leak test website’.
- First of all, open the browser.
- Now go to ‘DNSleaktest.com’.
- Next, hit ‘Standard test’ button.
- As you are done with the steps, then do check ISP column for getting acquainted with the name of the DNS service that ought to be used by you.
How One Can Test DNS Settings on Windows 10
If from the CloudFlare, the DNS settings have been configured by the user, it can instantly have a look on whether if the traffic is been passing through that of the resolver that the user has configured with the aid of the nslookup tool.
- First of all, open the start.
- Now look for ‘cmd’.
- Then hit, ‘command prompt’ that appears as a topmost result.
- Type the nslookup command and hit ‘enter’.
Below the ‘Default Server Field’; you’ll find the DNS service name which the user is been using. In that of the ‘address’ field, the DNS address would be indicated.
How One Can test DNS settings with the use of Router
If instance, you have altered the router settings, then nslookup won’t work. This is because it will display the IP address of your router like that of the DNS server. This should not be misinterpreted that traffic is not using the service that you have configured.
- First of open up your browser.
- Now you can easily sign it with that of your router with the aid of the IP address.
- Search for the Network tools.
- Now opt nslookup, same as that of the test method.
The Bottom Line
From the article, you must have got an idea, how one can easily check if the network traffic is been using the DNS server that the user set. In this article, the readers will get acquainted with the entire info on what is DNS and its workability. Though we have tried to wrap the whole about DNS, still if you have any queries, kindly let us know in the comment section.